Elektra Semiautomatica Gasket Kit PRE-2005

​Gasket Kit Microcasa Semiautomatica

Fits: Models built before 2005*

This factory-assembled gasket kit includes the gaskets and o-rings to rebuild an Elektra Semiautomatica built BEFORE 2005. High-heat, food-safe silicone grease is not included (see recommended item below).

*Please note: Elektra non longer produces the flat gasket/spacer (00098035) but we have had it produced professionally and locally here in Oregon. Our gasket is 2.4mm thick, so slightly thicker than the original version. Note that if your boiler bolt holes' threads are worn out at the entry point, then you might need longer bolts. You can add the spacer to your kit in the drop down menu.

• If you do not have the groove for the o-ring as shown below, then you need this gasket to seal the group to the boiler. 
  
• Just because you see the spacer installed on your unit does not mean that you do not have the groove on the boiler, shown in the image below.
• And if you do have the o-ring, then you can still install this Teflon gasket as a thermal insulator. 
• If you do not want it, you can remove it from the kit using the drop down menu below and pay less for the kit.