La Pavoni Europiccola & Professionale 'Millennium' Gasket Kit Version II

AS OF 8/31/2023, WE HAVE UPDATED OUR MILLENNIUM GASKET KITS.

Please see this link for the new kit: MP/MPN-96 Kit

To help avoid confusion on which gasket kit customers should order (based on which grouphead gasket their machine uses), we now offer a single gasket kit that includes both the MP-55 and MPN-55 grouphead gaskets. We have also added the two P-110CA Steam Wand O-Rings found on all bayonet-style wands.

ALL MILLENNIUM KITS ARE NOW 13-PIECE KITS, but the price has not increased. You will need only 12 pieces, so you will be left with an extra grouphead gasket. 

10-Piece Gasket Kit to Rebuild Grouphead and Steam Valve on some models of Millennium Europiccola, Professionale, and Stradivari (and related lever models) manufactured after 2008.

Now available with Silicone Piston Gaskets! See the drop down menu below to substitute the standard black piston gaskets with the Blue Silicone P-53 piston gaskets.

For folks interested in the information regarding the difference between the previous Version and Version II kits, continue reading below. Otherwise, disregard this information.

According to the Pavoni factory, some Millennium machines manufactured after approximately March 2008 have the MPN-55 grouphead gasket. We recommend inspecting your existing gasket before ordering if your date of manufacture is after 2008 or if you don’t know the date. (Remove the ABS base and look under the metal base to find the date sticker.)

The only noticeable difference is on the vertical outside edge: the MP-55 has a flat outside edge; the MPN has a ridged outside edge (slightly thinner by the bottom, flat edge and wider by the curved, top edge). Please click here to see a close up of the ridge present on the MPN-55. Note that after a gasket has been installed for years, it may be deformed. However, you should be able to tell if there is a ridge or not.

Additional parts are needed for a complete rebuild, such as Sight Glass Gaskets, Heating Element Gasket and more depending on your machine’s age and version.

The MPN-55 Kit includes the following:

1 of MPN-55 Grouphead Gasket

2 of P-53 Piston Gaskets (See silicone substitution option below)

1 of P-50 Piston Washer

1 of P-51 Piston C-Clip

1 of P-49 Shaft Gasket

1 of P-23 Steam Valve Gasket

1 of P-2 Knob O-Ring

1 of P-45 Boiler to Group Gasket

1 of MP-2 O-Ring for Teflon Sleeve

Food Grade Grease

—-Detailed Instruction Sheet included—-

Note: To remove the C-Clip retaining ring, you will need a pair of “snap ring pliers,” such as one of these on Amazon: https://amzn.to/3GXOwGL Note that these are relatively inexpensive and intended for occasional use.

See below or click here for a simple and inexpensive sleeve removal tool to help with the installation of the MP-2 O-ring. We also offer a more substantial tool modeled after the Pavoni factory version. Pavoni has made Millennium lever machines made since the year 2000. See Stefano's How-To You Tube video to remove the MP-3 Sleeve here. https://bit.ly/SEC-MP3

If you’re not sure if you have a Millennium or Pre-Millennium model, then click here for measurements.