Standard 8-Liter Water Softener

Espresso machine water softener, Cationic resin 8 liters water softener, for COLD water line ONLY.

Waters softeners are a must for every commercial and plumbed-in home espresso machine to help control calcium and lime deposits.

This softener is rechargeable, alleviating the need to replace expensive cartridges.

• connection 3/8 BSP
• dimensions: height 400 mm - ø 185 mm
• resin content 5.8 L
• regeneration salt(NaCl-table salt)1 kg

You will need an additional 7” of height clearance to remove the top cover and add salt when recharging the resins, and an additional 4” clearance side to side in front to attach inbound and outbound water lines.

Line pressure should be regulated to 3 bar (45PSI).

Pressure spikes exceeding 8 bar (65PSI) may damage the stainless steel shell.

Depending on your location, shipping usually ranges from $30 to 75.00 or higher. During check out you will have the exact rate base don your shipping method of choice.

This item is not returnable.

UPS shipping ONLY (USPS not available)

This product cannot be shipped outside the USA.

Does not qualify for free shipping offers.

Please note: A softener will slow down the buildup of minerals/scale, but it will not completely remove them, so you will still need to descale. The frequency depends on how often you use your machine and the minerals in your raw water. The frequency of cartridge replacement or resin regeneration will also affect your softener’s efficiency.